35W Power Supply module DC 5.5~30V to 0.5~30V 4A Power Converter DC 5V 12V 24V Adapter/Regulator/Driver with Case LCD Display

It is a Adapter/regulator/Power Supply module. Input voltage: DC 5.5~30V. Output voltage: DC 0.5~30V. Output current: 4A for long-term working. Output power: 35W. Application: as a normal buck boost converter module with over-current protection; as a battery charger; as a high-power LED constant current driver module, etc.

• Input voltage: DC 5.5~30V (If input voltage lower than 5V, it can achieve buck/boost, but the measured voltage and current value will be inaccurate. When input voltage lower than 4.7V, it will trigger under-voltage protection).
• Output voltage: DC 0.5~30V
• Output current: 4A for long-term working
• Output power: 35W
• Voltage display resolution: 0.01V
• Voltage accuracy: 1%
• Current display resolution: 0.001A
• Current accuracy: 1%
• Conversion efficiency: about 88%
• Soft start: YES (maybe invalid when starting with high-power load)
• Working frequency: 180kHz
• Size: 72 x 59 x 32mm
• Application: as a normal buck boost converter module with over-current protection; as a battery charger; as a high-power LED constant current driver module, etc.

• Soft start;
• Input reverse connection protection
• Output anti-backflow protection
• Short-circuit protection
• Over-current protection
• Over-power protection
• Over-temperature protection

• IN/OUT button:
• Short press: switch to display input voltage/output voltage/module temperature.
• Long press: switch to display output current/output power.
• ON/OFF button:
• Short press: control output ON/OFF.
• Long press: set output default ON/OFF when powered on.

1 x Buck Boost Board ( Power Supply module/regulator/Adapter/Power Converter )