Power Supply module DC 5V~27V to 1~24V 3A Power Converter/Buck module 30W Adjustable Voltage Regulator/Adapter/Driver

  • Item ID #200404

List Price: $19.50 Our Price: $7.50Save 62%

It is a Power Converter/Power Supply module. Input voltage: DC 5V~27V. Output voltage: DC 1~24V. Output current: 3A max. Recommend to use within 2.5A. Output power: lower than 30W. Application: DIY Power adapter, industrial equipments, electronic equipment, Communications Equipment, Batteries Buck, Car Power Supply etc

Other Products in DC Buck/Step Down

page 1 of 2 Previous Page Next Page
  • Input voltage: DC 5V~27V (Input voltage should be 2V higher than output voltage)
  • Output voltage: DC 1~24V
  • Output current: 3A max. Recommend to use within 2.5A
  • Output power: lower than 30W
  • Voltage resolution: 0.01V
  • Voltage precision: defaulted ±0.1V (can be adjusted manually)
  • Current resolution: 0.001A
  • Current measurement range: 0~3A
  • Current precision: defaulted ±0.05A
  • When output current lower smaller than 0.05A, the display error will be large; small current of 10~40mA are not be able to be displayed.
  • Capacity resolution: 0.001Ah
  • Capacity measurement range: 99.99Ah
  • Conversion Efficiency: < 95%
  • Working current: 30mA
  • Dimension: 55 x 73.5 x 27mm
  • PROTECTION: reverse connection protection; anti-backflow protection; over-current protection.
  • DISPLAY: clear LCD screen displays input voltage, output voltage, output current, power, capacity (switch by button).
  • FEATURES: with buttons to calibrate accuracy, switch display parameter and control output; with potentiometer knob to adjust CC & CV; with indicators to indicate output status and charging status.
  • Input reverse connection protection: Yes
  • Output anti-backflow protection: Yes. Can be used for charging directly without adding a diode.
  • Short-circuit protection: Yes
  • Input & output terminals:
  • Input: terminal block & DC 5.5 jack
  • Output: terminal block & USB port
  • 1). The USB output voltage value is the same as the terminal block output voltage value instead of 5V fixed, please check the output voltage before connecting any USB device.
  • 2). The case is packaged unassembled to avoid damage during transit. It needs to be assembled manually.
  • 3). If the output voltage cannot be adjusted, please rotate the CV potentiometer anti-clockwise for 20 laps and try again.
Package Includes:
  • 1 x Step-Down Power Module ( Adapter/Voltage Regulator/Power Converter/Driver )


* Required information
Choose a ranking for this item. 1 star is the worst and 5 stars is the best.
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed