LM2596 DC 3.2-40V to 1.23-37V Buck Converter Blue LED Voltmeter Voltage Monitor 12V 3A Adjustable Power

Parameter:

• Input voltage: 3.2-40V
• Output voltage: 1.23-37V
• Output Current: 1.5A (peak 3A)
• Operating frequency: 150HZ
• Output ripple: less than 30mv (no load)
• Standby current: 80μA
• Conversion efficiency: up to 92%
• L*W*H: 4.4 x 3.4 x 1.7 cm
• Load regulation: ± 0.5%
• Voltage regulation: ± 2.5%
• Operating temperature: Industrial grade (-40 °c to +85 °c) (ambient temperature exceeds 40°c, lower power use or enhance heat dissipation).

• With self-resetting fuse, automatic disconnection after a short circuit, self-healing after released.
• With terminal, no welding, easy wiring.
• With power indicator light
• With reverse polarity protection
• High efficiency, low heat

• Adjustable output voltage step-down module, Input voltage must be higher than the output voltage, by rotating the potentiometer to change the output voltage, clockwise boost, counterclockwise buck.
• Wiring: GND(Negative input); IN(Input Positive); GND(Negative Output);OUT(Output positive)
• Please use the linear power supply or battery, do not recommend the use of switching power supply as the input source.
• It is not recommended for Ripple Sensitive Equipment, such as audio amplifiers and so on.

• 1x DC Buck Converter