15W Brushless Motor Driver DC 5~12V 1.5A Three-phase Brushless Sensored Controller BLDC Speed Control switch for Motor/Hard etc

  • Item ID #2001710013
Qty.:

List Price: $13.50 Our Price: $3.80Save 72%

Price(per unit)
1-4
$3.80
5-9
$3.61
10-19
$3.42
20-29
$3.23
30+
$3.04
Buy More: please contact us

It is a 15W Motor Driver/Brushless Controller/Speed Control switch, Operating voltage: DC 5~12V(limit 15V), Operating current: continuous 1.5A (peak 2A),  Suitable for Motor/Hard etc.


Other Products in DC Regulator

page 1 of 2 Previous Page Next Page
Parameters:
  • Operating voltage: DC 5~12V(limit 15V)
  • Operating current: continuous 1.5A (peak 2A)
  • Control power: 15W (max rated value)
  • Static current: 0.005A (standby state)
  • PWM duty ratio: 0%~100%
  • Highest speed: about 10000r (depends on the motor )
  • Dimension: 30 x 25 x 15mm
Attention:
  • 1. Please offer only DC power supply, and with sufficient current. Please use it according to the parameters, ensure the correct wiring then connect to your motor. (It is recommended input voltage with range DC 5.5-6V for the first testing, then adjust the voltage according to the motor working condition.)
  • 2. The motor controller is designed with input reverse connection protection. Please use it for motor with applicable parameters, or the chip will be burned. There is LED indicator if motor unmatched.
  • 3. There are three-wire brushless motors and four-wire brushless motors, if used for three-wire brushless motor, three wires directly connect to the module terminals W, V, U separately, on need to distinguish order, but required solid connection. For four-wire brushless motor, there is a COM wire, which is no need to connect to the module. If connect, the module will be damaged.
  • 4. Motors within 7200rpm, input voltage range is DC 5-12V, it is recommended input voltage with range of DC 5.5-6V for the first testing, then increase the voltage according to the motor working condition. For used motor with small internal resistance, recommend operating voltage DC 5-9V. Motor more than 7200rpm with small internal resistance, recommend operating voltage DC 5-7V, input 12V will burn the module.
  • 5. Please offer pure DC power supply, it will be better to offer current more than 1.5A, the quality of the power supply will influence the performance of the driver module. If the motor cannot start or start difficultly for the power supply, please try another power supply.
  • 6. It is used for three-phrase brushless motor with power no more than 15W. Not suitable for brushed motor.
Package Including:
  • 1 x Three-phrase Brushless Motor Driver

Reviews

* Required information
Choose a ranking for this item. 1 star is the worst and 5 stars is the best.
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed