Power Converter DC 3~35V to 3~35V 6A Adjustable Voltage Regulator/Power Adapter/USB Charger/Driver Module/Mobile Power Supply for laptop/Mobile phone

  • Item ID #090646
Qty.:

List Price: $25.50 Our Price: $14.50Save 43%

Price(per unit)
1-4
$14.50
5-9
$13.78
10-19
$13.05
20-29
$12.33
30+
$11.60
Buy More: please contact us

It is 100W Adjustable Voltage Regulator/Adapter/USB Charger,  Input voltage : DC 3~35V ( limit 36V), Output voltage :DC 3~35V( continuously adjustable , the default output is 19V),  Output Current : 6A( MAX ), small size, high efficiency, long term stable and reliable quality,easy installation and use, Suitable for Battery Charger,Mobile Phone Charger,  electronic equipment, industrial equipment,LED drive,Advertising screen,Monitoring System etc


Other Products in DC Boost/Step Up

page 1 of 2 Previous Page Next Page

Module Parameters:

  • Module Properties: non-isolated step-up module (BOOST),100W Adjustable Mobile Power Supply,USB Charge.
  • Input voltage : DC 3~35V ( limit 36V)
  • Input Current : 10A (MAX) Please enhance heat dissipation more than 6A
  • Quiescent Current : 15mA, not include the current of voltmeter (12V boost to 20V , the shizuta current will increase when output voltage is higher )
  • Output voltage :DC 3~35V continuously adjustable , the default output is 19V.
  • Output Current : 6A MAX, Please enhance heat dissipation over 5A
  • Output power = input voltage * 6A
  • Working temperature: -40°c to +85 °c( please enhance heat dissipation when ambient temperature is too high )
  • Operating Frequency : 280KHz
  • Conversion efficiency : up to 96%
  • Overcurrent protection : Yes ( input exceeds 12A, automatically reduces the output voltage , have a range of error . )
  • Short-circuit protection: ( input 15A fuse ) double circuit protection
  • Input Reverse Polarity Protection: No , ( if necessary , please connect diode with input in series )
  • Output anti-anti- irrigation : Yes, no need for plus blocking diode when charging.
  • Identify resistance : Tablet PC , ipad, iphone ( some phones identify circuit is different, need to be adjusted )
  • Voltmeter minimum resolution : 0.05V(10V or less automatically switch the decimal point )
  • Wiring: free welding output terminals
  • Please note: This DC converter is single output, the output voltage of the USB port is the same as the output voltage of the module, if your load is USB device, please make sure the module's output voltage is set at 5V.

Applications:

  • 1, DIY a power supply, with voltage display
  • 2, As the power supply for your electronic device, can set the output voltage value according to your system.
  • 3, As the car power supply, power for your laptop, PDA or a variety of digital products supply.
  • 4, solar panels regulator.
  • 5, DIY high current mobile power, with a single lithium battery can be boosted to 5V, built-in USB port and identify resistor, and a large current output 2.5A, which charging for some phone simultaneously.

Instructions:

  • 1, Voltmeter power options : you can select power the voltmeter from Input or Output by jumper on the board. you can short the jumper to reduce the loss of the voltmeter. Remove the the jumper cap, the voltmeter does not work.
  • 2, USB output port: USB interface is connected to the output directly, with the identify resistor. Please make sure the USB output voltage is consistent with the voltage of your products. Otherwise it will burn your digital products.
  • 3, Switch to display the voltage: VI: input voltage; VO: output voltage

Package include:

  • 1 x DC Boost Converter + Voltmeter ( USB Charge/Adjustable Voltage Regulator/Power Adapter )

Reviews

* Required information
Choose a ranking for this item. 1 star is the worst and 5 stars is the best.
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed