72W Power Supply Module DC 8~32V to 12~35V 3A Boost Converter/Voltage Regulator/Driver Module DC 12V 24V Adapter

  • Item ID #090397
Qty.:

List Price: $12.50 Our Price: $8.00Save 36%

Price(per unit)
1
$8.00
2-4
$7.60
5-9
$7.20
10-29
$6.80
30+
$6.40
Buy More: please contact us

It is a Power Supply Module/Adapter, Input Voltage: DC 8~32V, Output voltage : DC 12~35V (adjustable), Output current: 3A (12V turn to 24V) ; 5A(12V turn to 19V)  (exceed 4A please enhance heat dissipation), Suitable for DIY an adjustable voltage regulated power supply, Industrial equipment Voltage convert, Power Supply Transformers, Laptop Power Supply, Batteries Buck, Car Power Supply etc.


Other Products in DC Boost/Step Up

page 1 of 2 Previous Page Next Page
Feature:
  • Module Name: 72W Boost module
  • Module properties: non-isolated module
  • Input Voltage: DC 8~32V
  • Output voltage : DC 12~35V   (adjustable)
  • Output current: 3A (12V turn to 24V) ; 5A(12V turn to 19V)  (exceed 4A please enhance heat dissipation)
  • Output power: 72W (natural cooling), 100W (enhance heat dissipation )
  • Output ripple: less than 50mV ,20M bandwidth
  • Conversion efficiency: efficiency 92%(12 turn to 24V 3A ),  efficiency 93%(12 turn to 19V 3A)
  • Operating temperature: Industrial grade -40°c to +85°c (ambient temperature exceeds 40 degrees, reduce power or plus fan)
  • Full load temperature rise: 45°c
  • No-load current: typical 30mA
  • Load Regulation: ± 0.5%
  • Voltage Regulation: ± 0.5%
  • Dynamic response speed: 5% 200uS
  • Short circuit protection: None (please enter retrofitting fuse or protective circuit)
  • Input reverse polarity protection: None (If need please install diode at input port )
  • Wiring: Terminals, Needn't solder, V-IN input, V-OUT output
  • Module size: 65mm x 51mm  
Some Applications:
  • DIY an output adjustable vehicle power supply, 12V input,14-35V output (adjustable)
  • Universal Car Laptop power. 12V Input , the output can  be adjusted to the laptop operating voltage
  • Boost charger,such as, for the 24V battery
  • Power supply for electronic equipment
  • Front of a system power supply:when the input voltage is 10~18V and the system board requires about 24V output(high power)
Note:
  • Input voltage must be less than the output voltage, for example,when 24V output ,the range of input is 8-24V
  • 12V 1 meter wire(1.5 m2),if longer than 1 meter,please use larger wire .
  • When needs to work on high-power, high-temperature or plus shell  please install a fan, be sure the  temperature of module heat sink not exceed 80°c
  • 12V battery discharge voltage should not be lower than 10.5V, Li-ion battery used in tandem (single 3.7V) discharge voltage should not be lower than 2.7V
Package Include:
  • 1 x DC Boost Converter ( Power Supply Module/Adapter )

Customers who bought this product also purchased...






Reviews

* Required information
Choose a ranking for this item. 1 star is the worst and 5 stars is the best.
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed