Input voltage: 6V ~ 40V
Input Current: 15A (max)
Output voltage: 8V ~ 80V
Output Current: 0 ~ 9.99A
Voltage, current resolution: 0.01V, 0.01A
Output Power: 400W (max)
Effective power P = Input voltage * 10A
Conversion efficiency: Up to 95%
Display: 4 digits high brightness LED
Short circuit protection: 15A Fuse
Dimensions: 86 * 75 * 63 mm
the input and output correctly, ensure that the input voltage is within
the required range, the reverse is strictly prohibited.
Boot default display voltage value
How to set the voltage and current values:
display as"XX.XX",unit"V", Adjustment/display resolution 0.01V, short
press"↑""↓"can adjust voltage precisely, long press"↑""↓"can adjust
voltage quickly. after setting voltage value, press "SET" button until
LED display "----", then the voltage value have been saved.
Press"SET"button will switch to current display, current display
as"X.XXA",unit is "A". Adjustment/display resolution 0.01A, short
press"↑""↓"can adjust current precisely, long press"↑""↓"can adjust
current quickly.after setting current value, press "SET" button until
LED diaplay"-----",then the current value have been saved.
Powered automatic output function on / off method: Press "OK" button,
then power the module, the release the button when display "--0-" . If
display "--y-", it indicates opened the function of output automatically
after powered , If display "--n-" , it indicates closed the function
of output automatically after powered.
If the output voltage and current change slowly, this does not affect the normal use,
Please use the fan with high power and long work to enhance heat dissipation.
the use of powering the high-power electrical appliances, please turn
off the automatic output function. Press the "OK" button after connected
the input and output. Until the voltage is set to rise, then re-opened
To charge the battery, please turn off the
automatic output function, set the appropriate charging voltage and
current, then connect the battery, and press the "OK" button to output,
you can recharge the battery.
This module is the use of single-chip adjustable constant current mode, and the adjustment of changing speed is slower.